女人阴性道图片真人18

收藏本站 提供:電熱管價格和電熱管規格型號大全,還提供電熱管接線、選型的問題,特耐佳電加熱器高端電熱供應商。

耐腐蝕單頭電熱管

型號:未知

報價:面議

聯系電話:051257123258

產品介紹

用戶評價

今日出廠產品展示及部分報價

產品詳細介紹
Product details
一、耐腐蝕單頭電熱管概述
A single head electric heat pipe, corrosion resistance of
耐腐蝕單頭電熱管結構:以抗腐蝕金屬管(通常選

汽車模具加熱管|電熱管|單頭電熱管

汽車模具加熱管|電熱管|單頭電熱管

用鈦材)作元件外套管。接線端部采用耐腐蝕橡塑合成材料模壓而成。 用途:廣泛用于海水養殖、化工、野外作業。 電壓:110-440V 功率:≤10KW/支 推薦規格:16︿25×100︿1000
Corrosion resistant single head electric heat pipe structure: corrosion resistant metal tube (usually choose titanium) elements jacket pipe. The terminal uses the corrosion resistant synthetic rubber material molding. Application: widely used in aquaculture, chemical, field operation. Voltage: 110-440V power: ≤ 10KW/ a recommended specification: 16 * 100 ^ 1000 ^ 25
二、耐腐蝕單頭電熱管防腐方式
Two, corrosion resistant single head electric heat pipe anticorrosion method
防腐電熱管通常采用四種方式:一外殼采用防腐金屬鈦材,二外殼采用316L不銹鋼,三在普通金屬材料外面加套一層高防腐性能的聚四氟乙烯套管,四普通金屬管外表面燒結一層耐溫耐腐蝕的陶瓷材料.
Anticorrosive electric heating tube is usually used in four ways: a shell made of anticorrosive metal titanium, two shell is made of 316L stainless steel, PTFE sleeve three and a high corrosion resistance in the outside of common metal materials, ceramic materials four ordinary metal tube outer surface of sintering layer temperature corrosion.
鈦管防腐電熱管防腐能力強,質量密度小,重量輕,但價格高,功率密度大,常用規格,管徑10mm及12mm,正常設計功率500W-2000W每米.
Titanium pipe anticorrosive electric heating tube with strong anti-corrosion ability, quality of small density, light weight, high price, high power density, common specifications, diameter of 10mm and 12mm, the normal design of 500W-2000W power per meter.
316L防腐電熱管防腐能力一般, 價格適中,功率密度大,常用規格,管徑10mm及12mm,正常設計功率500W-2000W每米.
316L anticorrosive electric heating pipe anticorrosion ability in general, moderate price, high power density, common specifications, diameter of 10mm and 12mm, the normal design of 500W-2000W power per meter.
三、耐腐蝕單頭電熱管發熱量的計算
The calculation of three, corrosion resistant single head electric heat pipe heat
可以用調壓器通過改變輸入電壓和電流來改變發熱量。發熱量與電壓平方成正比,與電流平方成正比;電壓變為原來的1/2時,發熱量變為1/4;電流變為原來的1/2時,發熱量也變為1/4。
By changing the input voltage and current to change heat with pressure regulator. Heat is proportional to the square of the voltage, and the current proportional to the square; voltage into the original 1/2, into 1/4 calorific value; current into the original 1/2, heat is changed to 1/4.
四、耐腐蝕單頭電熱管的優點
Four, good corrosion single head electric heat pipe
1、直徑小,可以做到3-25MM。
1, small diameter, can do 3-25MM.
2、長度不受限制,可以做到20-2000MM。
2, the length of the restriction, can do 20-2000MM.
3、功率高,可以做到(表面積20瓦特/平方厘米),國外甚至可以做到(表面積60瓦特/平方厘米)。
3, high power, can do (surface area 20 Watt / cm2), and even abroad, can do (surface area 60 Watt / cm2).
五、耐腐蝕單頭電熱管的性能要求
Five, single head electric heat pipe corrosion resistant performance requirements
1 泄露電流
1 leakage current
冷態泄露電流以及水壓和密封試驗后泄露電流應不超過0.5mA
The cold leak current and water pressure and seal leak current after test should not exceed 0.5mA
2 多個元件串聯到電源中時,應以這一組元件為整體進行泄露電流試驗。
More than 2 elements in series to power, should be in this group of components for the overall leak current test.
3 經受通斷電的能力 元件應能在規定的試驗條件下經歷2000次通斷電試驗,而不發生損壞
3 to pass power capacity component should be able to experience the 2000 on-off test in the test of the prescribed conditions, without the risk of damage

相關產品

*

*

051257123258
女人阴性道图片真人18